Warning: file_put_contents(/www/wwwroot/www.1000114.com/index/temp_block/www.anerinox.com/sreqnlekhtml.php): failed to open stream: No space left on device in /www/wwwroot/www.1000114.com/index.php on line 107
MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香

MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香

发布日期:2021年02月28日
Anmol India Chemicals India

ISO-9001 JK Kosher GMP GLPHACCP FSSAI FSSC 22000 HalalISO14001 IS0 17025 ISO 45001 Allergen free Gluten free
cGMP, GLP - FDA Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO ISO-45001, HACCP, FSSC 22000, FSSAI, "REACH" Registered, Kosher & Halal Certified. We observe WHO Good manufacturing practice and Good laboratory practice.

Search for the supplies that you need here:

MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香

Home ------ Contact

Benzoic Acid USP NF BP IP Analytical Reagent FCC Food Grade Manufacturers, with SDS

Anmol Chemicals Group, established in 1976, is the pioneer manufacturer of Specialty chemicals, Pharmaceutical Excipients, Fragrance & Flavor chemicals in India. Anmol Chemicals Group has manufacturing facilities spread across Western India, representatives in Houston Chicago USA, Dubai and UAE. We also have toll manufacturing units for processing chemicals in a few countries around the world. We make IP, BP, USP, Ph. Eur., FCC or Food Grade, Analytical Reagent Grade, LR or Laboratory Reagent Grade, Pure and Technical Grades of various chemicals. All our items are analyzed to meet the required standards. We can supply the material in grams for your laboratory trial and in tons for your plant scale jobs.

Our manufacturing facility is FDA approved and cGMP, GLP (FDA) Approved, ISO-9001, ISO-14001, ISO/IEC 17025, ISO OHSAS 18000, ISO 22000-2005 HACCP, FSSAI, FSSC-22000, certified. Apart from good manufacturing practice, we also follow good laboratory practice. We are offering products manufactured as per Kosher and Halal approved certified method. We are pre-registered with "Reach" for export to European countries. We can give all solid chemical materials as per specified size or shape. We observe WHO Good manufacturing practice and Good laboratory practice.

Exporter Importer by Sea Exports by Air Chemical Exporter. Palletized for Export. Liquid Products HDPE Drum Packing of Chemicals Bulk Export Packing Jumbo Bag Packing

Benzoic acid manufacturers

Synonyms: ----
CAS Number: 65-85-0, Molecular Weight: 122.1, Chemical Formula: C7H6O2, EINECS EC Number: 200-618-2, FEMA: ----,

Benzoic Acid BP

C7H6O2 -- 122.1 -- 65-85-0

DEFINITION
Benzoic acid contains not less than 99.0 per cent and not more than the equivalent of 100.5 per cent of benzene carboxylic acid.

CHARACTERS
A white, crystalline powder or colourless crystals, odourless or with a very slight characteristic odour, slightly soluble in water, soluble in boiling water, freely soluble in alcohol and in fatty oils.

IDENTIFICATION
A. Melting point  121C to 124C.
B. Solution S (see Tests) gives reaction (a) of benzoates.

TESTS
Solution S
Dissolve 5.0 g in alcohol and dilute to 100 ml with the same solvent.
Appearance of solution
Solution S is clear and colourless.
Carbonizable substances
Dissolve 0.5 g with shaking in 5 ml of sulphuric acid. After 5 min, the solution is not more intensely coloured than reference solution.
Oxidizable substances
Dissolve 0.2 g in 10 ml of boiling water. Cool, shake and filter. To the filtrate add 1 ml of dilute sulphuric acid and 0.2 ml of 0.02 M potassium permanganate. After 5 min, the solution is still coloured pink.
Halogenated compounds and halides
All glassware used must be chloride-free and may be prepared by soaking overnight  in a 500 g/l solution of nitric acid, rinsed with water and stored full of water. It is recommended that glassware be reserved for this test.
Solution (a) Dissolve 6.7 g of the substance to be examined in a mixture of 40 ml of  1 M sodium hydroxide and 50 ml of alcohol and dilute to 100.0 ml with water. To 10.0 ml of this solution add 7.5 ml of dilute sodium hydroxide solution and 0.125 g of nickel-aluminium alloy and heat on a water-bath for 10 min. Allow to cool to room temperature, filter into a 25 ml volumetric flask and wash with three quantities, each of 2 ml, of alcohol. Dilute the filtrate and washings to 25.0 ml with water.  This solution is used to prepare solution A.
Solution (b) In the same manner, prepare a similar solution without the substance to be examined. This solution is used to prepare solution B.
In four 25 ml volumetric flasks, place separately 10 ml of solution (a), 10 ml of solution (b), 10 ml of chloride standard solution (8 ppm Cl) (used to prepare solution C) and 10 ml of water. To each flask add 5 ml of ferric ammonium sulphate solution, mix and add drop wise and with swirling 2 ml of nitric acid and 5 ml of mercuric thiocyanate solution. Shake. Dilute the contents of each flask  to 25.0 ml with water and allow the solutions to stand in a water-bath at 20 °C for 15 min. Measure at 460 nm the absorbance of solution A using solution B as the compensation liquid, and the absorbance of solution C using the solution  obtained with 10 ml of water as the compensation liquid. The absorbance of solution A is not greater than that of solution C (300 ppm).
Heavy metals
12 ml of solution S complies with limit test B for heavy metals (10 ppm).
Sulphated ash
Not more than 0.1 per cent, determined on 1.0 g.


Benzoic Acid USP

Benzoic Acid
C7H6O2 122.12
Benzoic acid.
Benzoic acid [65-85-0].
Benzoic Acid contains not less than 99.5 percent and not more than 100.5 percent of C7H6O2, calculated on the anhydrous basis.

Identification— Prepare a saturated solution of Benzoic Acid in water, and filter twice. To one portion of the filtrate add ferric chloride TS: a salmon-colored precipitate is formed. To a separate 10-mL portion of the filtrate add 1 mL of 7 N sulfuric acid and cool the mixture: a white precipitate forms in about 10 minutes; this precipitate is soluble in ether.
Congealing range: between 121 and 123.
Water: not more than 0.7%, a 1 in 2 solution of methanol in pyridine being used as the solvent.
Readily carbonizable substances— Dissolve 500 mg in 5 mL of sulfuric acid TS: the solution has no more color than Matching Fluid Q.
Residue on ignition: not more than 0.05%.
Heavy metals— Dissolve 2.0 g in 25 mL of acetone, and add 2 mL of water. Add 1.2 mL of thioacetamide-glycerin base TS and 2 mL of pH 3.5 Acetate Buffer, and allow to stand for 5 minutes: any color produced is not darker than that of a control made with 25 mL of acetone, 2.0 mL of Standard Lead Solution, and treated in the same manner. The limit is 10µg per g.
Readily oxidizable substances— Add 1.5 mL of sulfuric acid to 100 mL of water, heat to boiling, and add 0.1 N potassium permanganate, drop wise, until the pink color persists for 30 seconds. Dissolve 1.00 g of Benzoic Acid in the hot solution, and titrate with 0.1 N potassium permanganate VS to a pink color that persists for 15 seconds: not more than 0.50 mL of 0.10 N potassium permanganate is consumed.


Benzoic Acid FCC Food Grade

C7H6O2 Formula wt 122.12
INS: 210 CAS: [65-85-0]

DESCRIPTION
Benzoic Acid occurs as white crystals, scales, or needles. It begins to sublime at about 100° and is volatile with steam. One gram is soluble in 275 mL of water at 25°, in 20 mL of boiling water, in 3 mL of alcohol, in 5 mL of chloroform, and in 3 mL of ether. It is soluble in fixed and in volatile oils and is sparingly soluble in hexane.

REQUIREMENTS
Identification: Dissolve 1 g of sample in a 20:1 (v/v) mixture of water and 1 N sodium hydroxide, filter the solution, and add about 1 mL of ferric chloride TS. A buff-colored precipitate forms.
Assay: Not less than 99.5% and not more than 100.5% of C7H6O2, calculated on the anhydrous basis.
Lead: Not more than 2.0 mg/kg.
Readily Carbonizable Substances: Passes test.
Readily Oxidizable Substances: Passes test.
Residue on Ignition: Not more than 0.05%.
Solidification Point: Between 121-123C.
Water: Not more than 0.7%.


Benzoic Acid Analytical Reagent
C6H5COOH
Formula Wt 122.12MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香
CAS Number 65-85-0

REQUIREMENTS
Assay: 99.5% C6H5COOH
Freezing point: 122-123C

MAXIMUM ALLOWABLE
Residue after ignition: 0.005%
Insoluble in methanol: 0.005%
Chlorine compounds (as Cl): 0.005%
Sulfur compounds (as S): 0.002%
Heavy metals (as Pb): 5 ppm
Substances reducing permanganate: Passes test


Benzoic Acid IP Grade

IP Grade is also offered.


Benzoic Acid SDS, Safety Data Sheet
MSDS Sheet; Material Safety Data Sheet

1. Product Identification

Product Name & Other Names: Benzoic Acid or Benzenecarboxylic acid or benzeneformic acid or phenyl carboxylic acid or phenyl formic acid or dracylic acid.
CAS No.: 65-85-0
EINECS EC Number: 200-618-2
Molecular Weight: 122.12
Chemical Formula: C6H5COOH
Relevant uses and uses advised against (if any): Industrial Manufacturing.
Suppliers: As per letterhead.

2. Hazards Identification

GHS, Globally Harmonized System Classification in accordance with 29 CFR 1910
Classification according to Regulation (EC) No 1272/2008

Skin corrosion/irritation (Category 2) H315
Eye damage (Category 1), H318
Specific target organ toxicity, repeated exposure (Category 1) H372

Labeling according GHS USA & Regulation (EC) No 1272/2008

GHS Label Elements
corrosive.png
Irritant

GHS Label Elements
healthhazard.png
Health Hazard

MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香Signal Words: Warning

Hazard statements:
H315 Causes skin irritation.
H318 Causes serious eye damage.
H372 Causes damage to organs (Lungs) through prolonged or repeated exposure if inhaled.

Precautionary statements:
P260: Do not breathe dust/fume/gas/mist/vapors/spray.
P262 Do not get in eyes, on skin, or on clothing.
P264 Wash skin thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P314 Get Medical advice/attention if you feel unwell.
P302+352: IF ON SKIN: Wash with soap and water.
P332+313: If skin irritation occurs: Get medical advice/attention.
P305+ P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337+P313 If eye irritation persists: Get medical advice/ attention.
P360 Rinse immediately contaminated clothing and skin with plenty of water before removing clothes.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi Irritant
Xn Harmful
Risk Phrases:
R36/38- Irritating to eyes and skin.
R41 Risk of serious damage to eyes
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.

3. Composition/Information on Ingredients

Product Name & Other Names: Benzoic Acid or Benzenecarboxylic acid or benzeneformic acid or phenyl carboxylic acid or phenyl formic acid or dracylic acid.
CAS No.: 65-85-0
EINECS EC Number: 200-618-2

4. First Aid Measures

Inhalation: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.
Ingestion: Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact: Wash exposed area with soap and water. Get medical advice if irritation develops.
Eye Contact: Check for and remove any contact lenses. In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Cold water may be used. Get medical attention.

5. Fire Fighting Measures

Fire: Flash point: 121C (250F) CC
Auto ignition temperature: 570C (1058F)
Explosion: Fine dust dispersed in air in sufficient concentrations, and in the presence of an ignition source is a potential dust explosion hazard. Minimum exposable concentration 0.011 g/l. Vapor may explode if ignited in an enclosed area. Vapor from molten benzoic acid may form explosive mixture with air.
Fire Extinguishing Media: Water spray, dry chemical, alcohol foam, or carbon dioxide.
Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face piece operated in the pressure demand or other positive pressure mode.

6. Accidental Release Measures

Personal precautions, protective equipment, and emergency procedures: Ventilate area of leak or spill. Avoid breathing dust/fumes/gas/mist/vapors/spray. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Restrict unprotected personnel from the area. Prevent any contact with hot surfaces. Do not approach facing the wind. Do not touch the spilled material.
Environmental precautions: Do not let the product enter drains, soil, or water sources.
Methods and materials used for containment Cleanup procedures and Storage:
Small Spill: Use appropriate tools to put the spilled solid in a convenient waste disposal container. If necessary: Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements.
Large Spill: Contain spilled material. Cover with an inert, non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Vacuum or sweep-up and remove to an approved disposal container. Neutralize the residue with a dilute solution of sodium carbonate. Finish cleaning by spreading water on the contaminated surface and allow to drain as per law.

7. Handling and Storage

Precautions for safe handling: Apply according to good manufacturing and industrial hygiene practices. Ensure proper ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Wash thoroughly after handling. Do not drink, eat, or smoke while handling. Avoid contact with skin, eyes, and clothing. Minimize dust generation. Avoid breathing dust/fumes/gas/mist/vapors/spray. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion and inhalation. Use individual protective equipment (waterproof boots, suitable protective clothing, safety glasses, etc.). Prevent any contact with hot surfaces.
Conditions for safe storage, including any incompatibilities: Store in cool, dry, and ventilated area away from heat sources and protected from sunlight in tightly closed original container. Keep air contact to a minimum. Store protected from heat, sparks and ignition sources and incompatible materials. Avoid contact with skin and eyes. Avoid inhalation of dust/mist/vapor. Do not store with incompatible materials like strong oxidizing agents and metals. Keep in a well closed container stored under cold to warm conditions, 2 to 40 C, (36 to 104F). Isolate from any source of heat or ignition. Isolate from oxidizing materials. Isolate from flammable materials.

8. Exposure Controls/Personal Protection

Airborne Exposure Limits: None established.
Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.
Personal Respirators (NIOSH Approved): For conditions of use where exposure to dust or mist is apparent and engineering controls are not feasible, a particulate respirator (NIOSH type N95 or better filters) may be worn. If oil particles (e.g. lubricants, cutting fluids, glycerin, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-face positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection: Wear protective gloves and clean body-covering clothing.
Eye Protection: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

9. Physical and Chemical Properties

Appearance: White, needle-like crystals.
Odor: Faint pleasant odor.
Odor threshold: Not available.
pH: 2.8 (saturated solution @ 25 0C)
Relative density: around 1.32
Boiling Point: 249C (480F)
Melting Point: 122C (252F)
Flash point: Not available.
Auto-ignition temperature: Not available.
Decomposition temperature: Not available.
Upper/lower flammability or explosive limits: Not available.
Vapor Density (Air=1): 4.2
Vapor Pressure (mm Hg): 1 @ 96C (205F)
Evaporation rate: Not available.
Flammability (solid, gas): Not available.
Partition coefficient: n-octanol/water: Not available.
Solubility: 0.29 g / 100 ml. water; sinks in water.
Viscosity: Not available.
Molecular Weight: 122.12
Chemical Formula: C6H5COOH

10. Stability and Reactivity

Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: Emits toxic vapors and gas including phenol, benzene, and carbon monoxide when heated to decomposition.
Hazardous Polymerization: Will not occur.
Incompatibilities: Oxidizing agents, bases, and metals. Water solutions can react with metals to produce hydrogen gas.
Conditions to Avoid: Heat, flame, ignition sources, dusting, and incompatibles.

MIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香11. Toxicological Information

Oral rat LD50: 1700 mg/kg; LC50 rat > 26,000mg/L/Hr.; irritation skin rabbit: 500 mg/24H mild; eye rabbit: 100 mg severe; investigated as a mutagen.
Carcinogenicity: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible, or confirmed human carcinogen by IARC.
Mutagenic Effects: Not available.
Teratogenic Effects: Not available.
Developmental Toxicity: Not available.
Reproductive Effects: No information available.

12. Ecological Information

Environmental Fate: When released into the soil, Benzoic Acid may leach into groundwater. When released into the soil, Benzoic Acid is expected to readily biodegrade. When released into the soil, this material is expected to have a half-life between 1 and 10 days. When released into water, Benzoic Acid is expected to readily biodegrade. When released into the water, this material is expected to have a half-life between 1 and 10 days. When released into water, this material is not expected to evaporate significantly. This material has a log octanol-water partition coefficient of less than 3.0. This material may bio accumulation to some extent. When released into the air, this material is expected to be moderately removed from the atmosphere by wet deposition. When released to the air, this material is subject to removal from the atmosphere by gravitational settling.
Environmental Toxicity: No information found.

13. Disposal Considerations

Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused Benzoic Acid in accordance with legal requirements.

14. Transport Information

DOT (USA) & ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATAMIAE-135 麻里梨夏MIAE-135 麻里梨夏,丁香六月月婷婷开心婷婷色香丁香六月月婷婷开心婷婷色香: Not dangerous goods

15. Regulatory Information

SARA 311/312: Immediate Health Hazard. See section 2.

16. Other Information

European Labeling in Accordance with EC Directives:
H315 Causes skin irritation.
H318 Causes serious eye damage.
H372 Causes damage to organs (Lungs) through prolonged or repeated exposure if inhaled.

Classification according to EU Directives 67/548/EEC or 1999/45/EC:
Hazard Symbols:
Xi Irritant
Xn Harmful
Risk Phrases:
R36/38- Irritating to eyes and skin.
R41 Risk of serious damage to eyes
R48/20 Harmful: danger of serious damage to health by prolonged exposure through inhalation.

Disclaimer:
********************************
Our company provides this Benzoic Acid SDS information sheet contained herein in good faith but makes no representation as to its comprehensiveness or accuracy. This Benzoic Acid MSDS sheet is intended only as a guide to the appropriate precautionary handling of the material by a properly trained person using this product. Individuals receiving the information must exercise their independent judgment in determining its appropriateness for a particular purpose.
********************************

Logo

Manufacturers

ANMOL CHEMICALS
Taloja Mumbai and Ankleshwar, INDIA
Representatives in Houston, Chicago and New York, USA
TEL: (OFF) +91-22-23726950, +9123774610, +9123723564

e-mail: info@anmol.org

Copyright and Usual Disclaimer is Applicable
Last updated 26-sep-20

Calcium Chloride in Jumbo Bags Drum Packing Paletized and Shrink Wrapped Packing for Exports to USA UAE Africa Tanzania Turkey Kenya Dubai

Exporters to USA, Canada, UAE, Europe, South Africa, Tanzania, Kenya, Egypt, Turkey, Nigeria, Uganda, Brazil, Chile, Argentina, Dubai, Cameroon, Mexico, Brazil, Chile, Argentina, Korea, Thailand, Malaysia, Indonesia, Australia, China, Germany, France, etc.

Representatives in New York, Houston - Texas, Chicago - Illinois, Los Angeles.

Fast Selling IP BP Ph Eur EP USP Analytical Reagent FCC Food Grades of Chemicals by Anmol Chemicals
Acetic Acid Glacial --- Aluminum Chloride --- Ammonium bicarbonate --- Ammonium Carbonate --- Ammonium Chloride --- Benzoic Acid --- Benzyl Alcohol --- Boric Acid --- Borax; Sodium Borate --- Calcium Butyrate --- Calcium Carbonate --- Calcium Chloride --- Calcium Hydroxide --- Calcium Saccharate --- Carbamide Peroxide --- Calcium Oxide --- Calcium Sulfate --- Chromic Chloride --- Copper Sulfate --- Cupric Chloride --- Ferric Chloride --- Fumaric Acid --- Magnesium Butyrate --- Magnesium Chloride --- Magnesium Sulfate --- Malic Acid --- Maleic Acid --- Manganese Chloride --- Manganese Sulfate --- Octyldodecanol --- Oleic acid --- Phenylethyl Alcohol --- Propylene Carbonate --- Potassium Bromide --- Potassium Bicarbonate --- Potassium Carbonate --- Potassium Chloride --- Potassium Hydroxide Pellets --- Potassium Alum --- Selenious Acid --- Sodium Acetate --- Sodium Butyrate --- Sodium Bicarbonate --- Sodium Chloride --- Sodium Molybdate --- Sodium Selenite --- Sodium Perborate --- Sodium Hydroxide --- Sodium Sulphate --- Sodium Sulfide --- Sodium Thiosulfate --- Urea --- Zinc Chloride --- Zinc Sulphate ---
Other Best Selling Products
Ammonium Persulfate --- Butylated Hydroxyanisole --- Butylated Hydroxytoluene --- Sodium Bromate --- Sodium Diacetate -

Benzoic Acid
IP BP Ph Eur USP Analytical Reagent LR FCC Food Grades Manufacturers
Benzoic acid